Profiling hot isostatically pressed canister–wasteform interaction for Pu-bearing zirconolite-rich wasteforms

Zirconolite-rich full ceramic wasteforms designed to immobilize Pu-bearing wastes were produced via hot isostatic pressing (HIP) using stainless steel (SS) and nickel (Ni) HIP canisters. A detailed profiling of the elemental compositions of the major and minor phases over the canister–wasteform interaction zone was performed using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDS) characterization. Bulk sample analyses from regions near the center of the HIP canister were also conducted for both samples using X-ray diffraction and SEM-EDS. The sample with the Ni HIP canister showed almost no interaction zone with only minor diffusion of Ni from the inner wall of the canister into the near-surface region of the wasteform. The sample with the SS HIP canister showed ∼100–120 μm of interaction zone dominated by high-temperature Cr diffusion from canister materials to the wasteform with the Cr predominantly incorporated into the durable zirconolite phase. We also examined, for the first time, changes to the HIP canister wall thickness caused by HIPing and demonstrated that no canister wall thinning occurred. Instead, in the areas examined, the canister wall thickness was observed to increase (up to ∼20%) due to the compression occurring during the HIP cycle. Further, only sparse formation of (Cr, Mn)-rich oxide particles were noted within the HIP canister inner wall area immediately adjacent to the ceramic material, with no evidence for reverse diffusion of ceramic materials. Though the HIP canister–wasteform interaction extends to ∼120 μm when using an SS HIP canister for the system investigated, this translates to <<1 vol.% for an industrial scale HIPed wasteform. Importantly, the HIP canister–wasteform interactions did not produce any obviously less durable phases in the wasteform or had any detrimental impact on the HIP canister properties.     

New insights into microstructural changes during transient liquid phase bonding of GTD-111 superalloy

The effects of joining temperature (T_J) and time (t_J) on microstructure of the transient liquid phase (TLP) bonding of GTD-111 superalloy were investigated. The bonding process was applied using BNi-3 filler at temperatures of 1080, 1120, and 1160 °C for isothermal solidification time of 195, 135, and 90 min, respectively. Homogenization heat treatment was also applied to all of the joints. The results show that intermetallic and eutectic compounds such as Ni-rich borides, Ni−B−Si ternary compound and eutectic-γ continuously are formed in the joint region during cooling. By increasing t_J, intermetallic phases are firstly reduced and eventually eliminated and isothermal solidification is completed as well. With the increase of the holding time at all of the three bonding temperatures, the thickness of the athermally solidified zone (ASZ) and the volume fraction of precipitates in the bonding area decrease and the width of the diffusion affected zone (DAZ) increases. Similar results are also obtained by increasing T_J from 1080 to 1160 °C at t_J=90 min. Furthermore, increasing the T_J from 1080 to 1160 °C leads to the faster elimination of intermetallic phases from the ASZ. However, these phases are again observed in the joint region at 1180 °C. It is observed that by increasing the bonding temperature, the bonding width and the rate of dissolution of the base metal increase. Based on these results, increasing the homogenization time from 180 to 300 min leads to the elimination of boride precipitates in the DAZ and a high uniformity of the concentration of alloying elements in the joint region and the base metal.     

It doesn’t take a village to fall for misinformation: Social media use,discussion heterogeneity preference,worry of the virus,faith in scientists,and COVID-19-related misinformation beliefs

With the circulation of misinformation about the COVID-19 pandemic, the World Health Organization has raised concerns about an “infodemic,” which exacerbates people’s misperceptions and deters preventive measures. Against this backdrop, this study examined the conditional indirect effect of social media use and discussion heterogeneity preference on COVID-19-related misinformation beliefs in the United States, using a national survey. Findings suggested that social media use was positively associated with misinformation beliefs, while discussion heterogeneity preference was negatively associated with misinformation beliefs. Furthermore, worry of COVID-19 was found to be a significant mediator as both associations became more significant when mediated through worry. In addition, faith in scientists served as a moderator that mitigated the indirect effect of discussion heterogeneity preference on misinformation beliefs. That is, among those who had stronger faiths in scientists, the indirect effect of discussion heterogeneity preference on misinformation belief became more negative. The findings revealed communication and psychological factors associated with COVID-19-related misinformation beliefs and provided insights into coping strategies during the pandemic.     

Synthesis of cubic and monoclinic hafnia nanoparticles by pulsed plasma in liquid method

Hafnia (HfO₂, hafnium dioxide) is a wide band gap and high-κ material, and the metastable cubic hafnia has a much higher permittivity compared with the normal monoclinic hafnia. Here, we employ a one-step process, the pulsed plasma in liquid (PPL) method to synthesize two types of hafnia nanoparticles (NPs): one which is mainly in cubic phase (cubic: 81.7 at%, monoclinic: 18.3 at%) and the other which is in monoclinic phase. High-resolution transmission electron microscopy images showed that the particles were small (particle size ~3 nm). X-ray absorption fine structure analysis showed no chemical shifts, indicating that the synthetic hafnia NPs contained no oxygen vacancy. The synthetic hafnia NPs mainly in cubic phase showed a much higher relative permittivity than that of the commercial hafnia (monoclinic), and have a larger band gap than the synthetic monoclinic hafnia NPs.     

Synthesis and characterization of Co5Cr2(P2O7)4 - New pyrophosphate as a colouring substance

A new pyrophosphate(V) of the formula Co₅Cr₂(P₂O₇)₄ was obtained in the system Co₂P₂O₇–Cr₄(P₂O₇)₃ as a result of solid-state reactions taking place between different reactants. The new compound crystallizes in the orthorhombic system and belongs to the family of pyrophosphates of the general formula M₅²⁺M₂³⁺(P₂O₇)₄ and is probably isostructural with Fe₅²⁺Fe₂³⁺(P₂O₇)₄. Powder diffraction pattern, infrared spectrum and SEM image of the new compound were presented. As a new potential inorganic pigment, Co₅Cr₂(P₂O₇)₄ was tested for its thermal stability, particle size distribution and colour properties, which were studied both for powder and after introduction into organic matrix and leadless ceramic glaze. The colour of Co₅Cr₂(P₂O₇)₄ powder was defined as deep grey with the colour coordinates L*/a*/b* = 60.63/-1.42/-3.41 and according to the hue angle (h° = 247.39°) it belongs to the blue region. Co₅Cr₂(P₂O₇)₄, with its relatively high thermal stability (t _m = 1230 ± 10 °C) and appropriate colour properties, is a good candidate to be used as inorganic pigment for colouring of acrylic paints. In the case of leadless glaze, the obtained compound acts as a dye.     

Flow state monitoring of gas-water two-phase flow using multi-Gaussian mixture model based on canonical variate analysis

As a highly complex and time-varying process, gas-water two-phase flow is commonly encountered in industries. It has a variety of typical flow states and transition flow states. Accurate identification and monitoring of flow states is not only beneficial to further study of two-phase flow but also helpful for stable operation and economic efficiency of process industry. Combining canonical variate analysis (CVA) and Gaussian mixture model (GMM), a strategy called multi-CVA-GMM is proposed for flow state monitoring in gas-water two-phase flow. CVA is used to extract flow state features from the perspective of correlation between historical data and future data, which solves the cross correlation and temporal correlation of multi-sensor measurement data. GMM calculates the possibility that the current flow state belongs to each typical flow pattern and judges the current flow state by probability indicators. It is conducive to follow-up use of Bayesian inference probability and Mahalanobis distance-based (BID) indicator for flow state monitoring, which avoids repeated traversal of multiple CVA-GMM models and improves the efficiency of the monitoring process. The probability indicators can also be used to analyze transition flow states. The method combining the probabilistic idea of GMM with the deterministic idea of multimodal modeling can accurately identify the current flow state and effectively monitor the evolution of flow state. The multi-CVA-GMM method is validated by using the measured data of the horizontal flow loop of gas-water two-phase flow experimental facility, and its effectiveness is proved.     

煤矿冲击地压与冒顶复合灾害研究

随着煤矿向深部发展,矿井动力灾害既表现出冲击地压的部分特征,又表现出冒顶的部分特征。2种典型的灾害打破以往冒顶与冲击地压的发生具有一种互为逆向性的认知规律,在深部高应力煤巷,特别是留顶煤巷道中出现了相互诱导、复合发生的新灾害类型。在总结山东、山西和新疆矿区典型巷道冲击致顶板(顶煤)动力灾害特征的基础上,提出了深部巷道冲击地压与冒顶复合灾害的概念、机理与分类,指出复合灾害机理关键点在于揭示巷道整体系统和破碎区子系统的稳定原理及其2者间的相互影响。建立了巷道发生复合灾害的力学模型,根据扰动响应失稳判据,提出并得到了巷道发生复合灾害的临界应力Pcr、临界软化区半径ρ_cr和最大容许采扰应力增量σ_max,厘清了灾害发生的主控因素,分析了煤岩冲击倾向指数K、支护强度ps、巷道半径ρ₀、煤岩强度σ_c等对灾害发生的影响规律,同时阐明了围岩塑性软化、破碎深度随地应力增加的发育规律。研究结果表明,破碎发育巷道的动力失稳主体为弹性区、软化区与破碎区构成的不稳定系统,垮落主体为破碎区;稳定的破碎区提升了巷道冲击启动临界值,使其启动难度增大,但破碎区的发育又易引起顶煤垮落;巷道稳定支护是解决复合灾害的关键,科学合理支护既能有效调控围岩破碎防冒,又能提升冲击启动临界值。通过理论研究,揭示了巷道冲击地压与冒顶复合灾害的发生机理,阐明了巷道软化与破碎区及其稳控支护对深部破碎发育巷道动力灾害防治的重要性。     

微型土压平衡盾构机液压系统故障分析

以微型土压平衡(Earth Pressure Balance,EPB)盾构机推进液压系统作为研究对象,介绍了推进系统的工作原理,对混入空气后的油液黏度和有效体积弹性模量进行分析,建立了推进系统数学模型,并对混入不同百分比空气的系统进行仿真运算,得到了液压缸位移响应和速度响应随系统含气量变化的关系。研究表明:随着液压系统空气含量的增加,液压缸位移响应发生迟滞,速度响应变慢,液压缸在运动时产生振动。结合各液压元件工作原理,依次对实际盾构机推进系统元件进行排气,最终排除了液压系统中混入的空气,为实现盾构机平稳推进提供了理论依据。     

High-rate capability of carbon-coated micron-sized hexagonal TT-Nb2O5 composites for lithium-ion battery

With excellent specific capacity, superior cycle stability, safety and strong practical, Nb₂O₅ has been considered as one of the prospective anode materials for lithium-ion batteries (LIBs). However, current study suggests that Nb₂O₅ electrode materials for LIBs still face the vital issues of low electrical conductivity and poor rate performance. Therefore, carbon-coated TT-Nb₂O₅ materials are designed and synthesized through solid state method in this work, which present high specific capacity (228 mA h g^?1 at 0.2C), satisfactory rate properties (107 mA h g^?1 at 20 C). The outstanding electrochemical property can not only give the credit to the pseudocapacitance effect of TT-Nb₂O₅, but also attribute to introduction of carbon. The homogeneous carbon-coated materials enhance the electrical conductivity, increase the electron transmission speed and alleviate particle crushing. This research not only offers a new method for preparing excellent electrode materials, but also provides a kind of excellent anode material with prospective application for LIBs.